菠萝蜜视频网页版入口

Shanda Gas Co., Ltd. Website: soga-cpa.com 菠萝蜜视频网页版入口

Industry dynamics

Argon operation should follow the following operation

Written words: [big] [medium] [small] 2019/8/1 browsing times: Seven hundred and thirty-three     
Argon operation should follow the following operation

Argon has a certain asphyxiating effect when the concentration is high. It is also dangerous to use. It should be used in the right way. If the operation process can not be correctly installed, it may lead to unexpected consequences. Below Hefei industrial gases The manufacturer will introduce some operations for argon when you use it.


 Hefei industrial gases

Hefei industrial gases


1, before argon is used, the pressure in the argon tank should be adjusted to 0.8 to 1.2MPa, and the argon meter can be opened to make the pressure reach 0.18-0.25Mpa. Argon can satisfy the requirement of all pipeline connection equipment and control the argon meter pressure in a stable position.
2. During operation, tank pressure should be checked every shift. When the pressure is close to the upper and lower limits of the equipment requirements, or when it reaches or approaches the minimum storage capacity of the argon storage tank, the observation frequency should be increased and reported in time for replacement.
3. Turbocharging operation: when the tank pressure is close to the lower limit of the requirement of the equipment, the booster valve is boosted. The operation procedure is: slowly open the booster valve, and when the pressure gauge of the storage tank indicates that the normal working pressure of the device reaches the maximum working pressure of the storage tank, the booster valve is closed.
4, in order to ensure the purity of argon tank in later stage, the liquid level observation of the storage tank should be done in the process of using. When the liquid level is below the minimum value, it should be stopped.
Back to the previous step
Print this page
[upward]