菠萝蜜视频网页版入口

Shanda Gas Co., Ltd. Website: soga-cpa.com 菠萝蜜视频网页版入口

Industry dynamics

How to store high purity hydrogen bottles?

Written words: [big] [medium] [small] 2019/8/15 browsing times: Five hundred and seventy-one     
How to store high purity hydrogen bottles?

Gao Chunqing is one of the high purity gas products of industrial gases in Hefei. It is widely used in petroleum refining, float glass, electronics, food, chemical production, aerospace and other fields. Gao Chunqing is stored in high-purity hydrogen bottles, but the use of hydrogen bottles is dangerous. It is necessary for us to make corresponding preparations in storage. The following ten points are Hefei industrial gases Let me summarize this.


 Hefei industrial gases

Hefei industrial gases


1, and air conditioning installation, air compressor and ventilation configuration and other air suction gap should not be less than 20 meters.
2, the spacing between other inflammable gas storage areas should not be less than 20 meters.
3, indoor ventilation must be excellent. The highest content of high purity hydrogen in the air should not exceed 1%. The vent should be oriented towards the safety zone. The number of indoor ventilation should be no less than three times per hour, and the ventilation times of some ventilation should be less than seven times per hour.
4, a solid gas cylinder support.
5, when the valve or pressure reducer leaks, it should not be used continuously. When the valve is damaged, it is forbidden to replace the valve under pressure.
6, the gas in the bottle is strictly prohibited to be exhausted. The remaining pressure of 5 thousand PA should be kept.
7, the use of cylinders in multi-storey buildings, except for special production needs, should be deployed at the top of the wall.
8. Use cylinders to stop knocking and collision. Cylinders should not be close to heat sources; avoid exposure in winter.
9, the distance between high purity hydrogen bottles and containers containing flammable, explosive materials and oxidizing gases should not be less than 8 meters.
10, the distance between the fire and ordinary electrical configuration should not be less than 10 meters.
Back to the previous step
Print this page
[upward]